Home > Fiber Optic Switch >

Outdoor 4 Port Gigabit Managed Switch With POE Power Supply

Product Categories

OLT Optical Line Terminal [160]
GPON Optical Line Terminal [192]
GPON ONT ONU [160]
Fiber Optic Switch [358]
Optical Fiber Wifi Router [194]
FTTH Termination Box [12]
Fiber Optic PLC Splitter [10]
Fiber Optic Adapters [20]
EDFA Amplifier [24]
Fiber SFP Modules [88]
Rectifier Modules [112]
Switched Mode Power Supply [64]
Outdoor Wireless Surveillance System [256]
POE Wireless Access Point [80]
Integrated Circuit Chip [222]

Shenzhen Toptoday Network Co., Ltd.

Contact Now

Outdoor 4 Port Gigabit Managed Switch With POE Power Supply

Name: Outdoor 4 Port Gigabit Managed Switch With POE Power Supply
Brand: UBNT
Price: 1 USD

Wholesale Outdoor 4 Port Gigabit Managed Switch With POE Power Supply from china suppliers

Brand Name : UBNT

Model Number : N-SW

Place of Origin : China, Guangdong

MOQ : Negotiable

Price : Negotiable

Switch Capacity : 4 Gbps

Ports : 4

Weight : 271 g

Dimensions : 196.4 x 93.5 x 32.4 mm

Max. Power Consumption : 30W

Power Method : 24V, 2-Pair Passive PoE

Passive PoE Voltage Range : 21.6 - 30V

Warranty : 1 Year

Contact Now

UBNT N-SW outdoor switch 4-port POE power supply transparent transmission Gigabit switch

Installation Requirements

Mounting accessories and drain wire are not included.

Pole-Mounting

Drill with a 4.5 mm Drill Bit
7 mm Socket Wrench or Screwdriver

Wall-Mounting

(2) Screws (≤ 5 mm Screw Head)
(1) Drain Wire, Optional (≤ 12 AWG, ≤ 1 m)

Cables

Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the N-SW and the other at the entry point to the building. The ETH-SP-G2 will absorb power surges and safely discharge them into the ground.

 	 			Power LED
 		
 			The Power LED will light blue when the device is connected to a power source. 		
 			PoE LED
 		
 			Green 			Active 24V PoE 		
 			Link LED
 		
 			Green 			Link Established
Flashing Indicates Activity
 		
 			PoE In Port
 		
 			RJ45 port supports 10/100/1000 Ethernet connections and supports 24V, 2-pair passive PoE to power the switch. For maximum power consumption of 30W, we recommend supplying power with the POE-24-30W-G-WH PoE adapter (not included). 		
 			Ground Bonding Point
 		
 			The NanoSwitch must be grounded in one of the following ways:
Use the Self-Tapping Screw to ground the NanoSwitch directly to a grounded metal pole or structure.
Use the Machine Screw and Nut to attach a drain wire (not included) that is connected to a remote grounding block or structure.
 		
 			PoE Out (Ports 1 - 3)
 		
 			RJ45 ports support 10/100/1000 Ethernet connections and provide passive 24V, 2-pair PoE passthrough for up to 30W PoE output.
 				 						 
 						WARNING: PoE is always active. Before connecting a device to a PoE Out port, ensure that the device supports passive PoE and the supplied voltage. 					
 			 				 						 
 						WARNING: Do NOT provide more than a total of 24W PoE output (24V, 1A) per port or 30W total output; otherwise this will damage the NanoSwitch. 					
 			 		
 Connect a Drain Wire (Optional)If a drain wire is used to ground the NanoSwitch, attach it to the Ground Bonding Point with the Self-Tapping Screw and Nut.
 
Specifications 	 			N-SW 		
 	 			Dimensions
 			(Excluding Mount)
 			196.4 x 93.5 x 32.4 mm
 			( 7.73 x 3.68 x 1.28") 		
 			Weight
 			271 g
 			(9.6 oz) 		
 			Enclosure Characteristics
 			White Polycarbonate 		
 			Total Non-Blocking Line Rate
 			4 Gbps 		
 			Typical Power Consumption
 			1.5W 		
 			Max. Power Consumption
 			30W 		
 			Power Method
 			24V, 2-Pair Passive PoE 		
 			Networking Interfaces
 			(4) 10/100/1000 Mbps Ethernet RJ45 		
 			Total Passive PoE Max Wattage
 			24V, 2-Pair, 1A for 3 Ports (30W) 		
 			Passive PoE Max Wattage per Port
 			24V, 2-Pair, 1A per Port (24W) 		
 			Passive PoE Voltage Range
 			21.6 - 30V 		
 			ESD/EMP Protection
 			± 24kV Air, ± 24kV Contact 		
 			Operating Temperature
 			-30 to 70° C
 			(-22 to 158° F) 		
 			Operating Humidity
 			5 to 95% Noncondensing 		
 			Certifications
 			CE, FCC, IC
 
 		
 
 
 
 
 
 
 
 
 

Product Tags:

4 Gbps gigabit managed switch

30W 4 Port managed poe switch

POE power supply gigabit managed switch

Outdoor 4 Port Gigabit Managed Switch With POE Power Supply Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Toptoday Network Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

N-SW
Dimensions (Excluding Mount)	196.4 x 93.5 x 32.4 mm ( 7.73 x 3.68 x 1.28")
Weight	271 g (9.6 oz)
Enclosure Characteristics	White Polycarbonate
Total Non-Blocking Line Rate	4 Gbps
Typical Power Consumption	1.5W
Max. Power Consumption	30W
Power Method	24V, 2-Pair Passive PoE
Networking Interfaces	(4) 10/100/1000 Mbps Ethernet RJ45
Total Passive PoE Max Wattage	24V, 2-Pair, 1A for 3 Ports (30W)
Passive PoE Max Wattage per Port	24V, 2-Pair, 1A per Port (24W)
Passive PoE Voltage Range	21.6 - 30V
ESD/EMP Protection	± 24kV Air, ± 24kV Contact
Operating Temperature	-30 to 70° C (-22 to 158° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC